Analisis Sistem Utilitas pada Proyek Pembangunan Laboratorium Kesehatan Masyarakat Kota Manado

Simon  Ijie; Olivia  Moningka; Dian Puspita  Sari

doi:10.70716/reswara.v4i4.829

Authors

Simon Ijie Jurusan Teknik Sipil, Politeknik Negeri Manado, Manado, Indonesia Author
Olivia Moningka Jurusan Teknik Sipil, Politeknik Negeri Manado, Manado, Indonesia Author
Dian Puspita Sari Jurusan Teknik Sipil, Politeknik Negeri Manado, Manado, Indonesia Author

DOI:

https://doi.org/10.70716/reswara.v4i4.829

Keywords:

utility system, plumbing, clean water, wastewater, laboratory

Abstract

Utility systems are essential components that support the operational functions of buildings, including public health laboratory facilities that require adequate clean water supply and wastewater management. This study aims to analyze the requirements and capacity of the clean water and wastewater utility systems in the construction project of the Manado City Public Health Laboratory. A quantitative approach was employed, using primary data in the form of plumbing installation layout drawings and secondary data consisting of relevant journals and the SNI 8153:2015 standard. The calculations included daily water demand, peak-hour and peak-minute demand, dimensions of the ground water tank and roof tank, pump head and power requirements, as well as septic tank dimensions. The results showed that the total clean water demand was 4,250 liters/day, with an effective ground water tank volume of 2.517 m³ and a roof tank volume of 1.134 m³. The transfer pump required approximately 124.6 watts of power, while the booster pump required a minimum pressure of 1.35 kgf/cm². These results indicate that the planned utility systems adequately meet the operational requirements of the building.

References

Almeida, M. C., Vieira, P., & Silva, J. (2023). A digital integrated methodology for semi-automated analysis of water efficiency in buildings. Buildings, 13(12), Article 2911. https://doi.org/10.3390/buildings13122911

Badan Standardisasi Nasional. (2005). SNI 03-7065-2005 tentang tata cara perencanaan sistem plambing. Badan Standardisasi Nasional.

Badan Standardisasi Nasional. (2015). SNI 8153:2015 tentang sistem plambing pada bangunan gedung. Badan Standardisasi Nasional.

Badan Standardisasi Nasional. (2025). SNI 8153:2025 tentang sistem plambing pada bangunan gedung (revisi SNI 8153:2015). Badan Standardisasi Nasional.

Erwanto, Z., Ghifari, A. R., & Ulfiyati, Y. (2023). Evaluasi sistem plambing instalasi air bersih dan air kotor berdasarkan beban unit alat saniter di gedung pelayanan BPKB Polres Sumenep. Journal of Applied Civil Engineering and Infrastructure Technology, 4(1), 1–13. https://doi.org/10.52158/jaceit.v4i1.432

Fane, S., Reardon, C., & White, S. (2020). Water efficiency labelling and standards scheme: Impact assessment. Water Research Foundation.

Gurung, T. R., Stewart, R. A., Beal, C. D., & Sharma, A. K. (2016). Smart meter enabled water end-use demand data: Platform for residential water conservation and efficiency analysis. Journal of Cleaner Production, 112, 1230–1240. https://doi.org/10.1016/j.jclepro.2015.09.098

International Association of Plumbing and Mechanical Officials. (2012). Uniform plumbing code. IAPMO.

Kementerian Kesehatan Republik Indonesia. (2002). Keputusan Menteri Kesehatan Republik Indonesia Nomor 1405/MENKES/SK/XI/2002 tentang persyaratan kesehatan lingkungan kerja perkantoran dan industri. Kementerian Kesehatan RI.

Kementerian Lingkungan Hidup dan Kehutanan Republik Indonesia. (2015). Peraturan Menteri Lingkungan Hidup dan Kehutanan Nomor 56 Tahun 2015 tentang tata cara dan persyaratan teknis pengelolaan limbah bahan berbahaya dan beracun dari fasilitas pelayanan kesehatan. Kementerian LHK RI.

Kementerian Lingkungan Hidup dan Kehutanan Republik Indonesia. (2018). Peraturan Menteri Lingkungan Hidup dan Kehutanan Nomor P.5/Menlhk/Setjen/Kum.1/2/2018 tentang standar dan sertifikasi kompetensi penanggung jawab operasional pengolahan air limbah dan penanggung jawab pengendali pencemaran air. Kementerian LHK RI.

Komala, P. S., Nur, A., Ridwan, & Rinanda, B. L. (2025). Analisis alat plumbing hemat air di gedung perkantoran (studi kasus: Gedung Rektorat Universitas Andalas). Jukung (Jurnal Teknik Lingkungan), 11(1). https://doi.org/10.20527/jukung.v11i1.22194

Meilani, S., Astuti, A. D., & Ratnaningsih. (2017). Design of plumbing system at Tunjungan Plaza Apartment, Surabaya. Indonesian Journal of Urban and Environmental Technology, 1(1), 55–72. https://doi.org/10.25105/urbanenvirotech.v1i1.2406

Noerbambang, S. M., & Morimura, T. (2005). Perancangan dan pemeliharaan sistem plambing. PT Pradnya Paramita.

Novarizal, F. V., Pharmawati, K., & Nurprabowo, A. (2022). Perencanaan sistem plambing air bersih dan air limbah di Rumah Sakit X Bandung. Jukung (Jurnal Teknik Lingkungan), 8(1), 95–104.

Pinangkaan, P. D., Legrans, R. R. I., & Thambas, A. H. (2025). Analisis kinerja sistem plambing air bersih dan limbah pada gedung Rumah Sakit Sentra Medika Minahasa Utara. TEKNO, 23(92), 1489–1495.

Poerbo, H. (1992). Utilitas bangunan. Djambatan.

Rahayu, A. K., Pratama, Y., & Nurprabowo, A. (2020). Perencanaan sistem instalasi plambing air bersih dengan penerapan alat plambing hemat air di Rumah Sakit Universitas Sam Ratulangi. Jurnal Serambi Engineering, 5(2), 914–920. https://doi.org/10.32672/jse.v5i2.1918

Raubaba, H. S., & Hematang, Y. I. P. (2017). Analisis kebutuhan air bersih Gedung Fakultas Teknik Universitas Musamus. VOCATECH: Vocational Education and Technology Journal, 3(2), 54–64. https://doi.org/10.38038/vocatech.v3i2.78

Republik Indonesia. (2002). Undang-Undang Nomor 28 Tahun 2002 tentang bangunan gedung. Lembaran Negara Republik Indonesia Tahun 2002 Nomor 134.

Ruring, K., Legrans, R. R. I., & Tungka, A. E. (2025). Analisis sistem plambing air bersih dan air buangan pada gedung Hotel Amaris Manado. TEKNO, 23(92), 1063–1071.

Shelemo, A. A. (2023). Analisis perencanaan sistem jaringan pipa (plumbing) dan sistem reservoar air bersih pada bangunan gedung. PADURAKSA: Jurnal Teknik Sipil Universitas Warmadewa, 14(2), 250–259. https://doi.org/10.22225/pd.14.2.10980.250-259

Siregar, Z. H., Nasution, A. F., Mawardi, Puspita, R., Refiza, Nasution, A. S., Fazri, M., & Lubis, S. S. (2025). Optimalisasi sistem plumbing hemat air di Rusun Brimob Sampali Medan: Edukasi teknologi dan manajemen limbah cair. Jurnal Derma Pengabdian Dosen Perguruan Tinggi (Jurnal DEPUTI), 5(1), 329–340. https://doi.org/10.54123/deputi.v5i1.399

Sunarno. (2005). Mekanikal elektrikal. CV Andi Offset.

Tanggoro, D. (2006). Utilitas bangunan. Universitas Indonesia Press.

United States Environmental Protection Agency. (1992). Energy Policy Act of 1992: Water efficiency standards for plumbing fixtures. U.S. EPA.

World Health Organization. (2011). Guidelines for drinking-water quality (4th ed.). WHO Press.